A/T - Gear Range Can't Be Engaged/No Power Flow

Gear range cannot be engaged / no power flow

Topic number LI27.60-N-048889

Version 1

Design group 27.60 Gearshift, control

Date 02-05-2010

Validity Model 906 with automatic transmission

Reason for change

Reason for block

Complaint:
Gear range cannot be engaged.

Automatic transmission has no power flow at selector lever position D or R.

Cause:
a) Shift cable not engaged at transmission termination point.

b) Shift cable incorrectly adjusted.

Remedy:
a) Engage shift cable at transmission termination point. Check shift operation and adjust.

b) Adjust shift cable.

^ Shift mechanism and transmission in position D

^ Detach selector lever cover

^ Push sliding piece down; when it springs back the shift cable is adjusted (see Figures 1 and 2)

^ Check shift operation











Note:
Parts replacement is not necessary.