AR41.10-D-0101-01A Remove/Install Rubber Boot of Propeller Shaft

AR41.10-D-0101-01A Remove/Install Rubber Boot of Propeller Shaft








Removing

1 Loosen both clamps (2).
2 Pull propeller shaft (3) apart.
3 Remove rubber sleeve (1).

Install

4 Coat splined profile with multipurpose grease.

5 Slide rubber boot (1) onto propeller shaft (3).

6 Slide propeller shaft (3) together.

Pay attention to markings (arrows) for installation position. Use new clamps (2).

7 Check rubber boot (1) for correct seat and fasten clamps (2).