SI41.10-D-0004A Service Information Bulletin: Use of Modified Propeller Shaft Intermediate Bearing With Protective Caps

SI41.10-D-0004A Service Information Bulletin: Use of Modified Propeller Shaft Intermediate Bearing With Protective Caps






1 Grooved ball bearing
2 Protective cap

A Old version without protective caps
B New version with protective caps

Due to recent events we would like to notify you that with immediate effect the rejected center support bearing without protective caps can now be retrofitted on a bearing with protective caps.

The conversion is only allowed in a complaint case. In this case, all propeller shaft center support bearings are to be retrofitted once.

Except model 906.713/733

In this case, the propeller shaft assembly is to be replaced once.

Warranty and goodwill claims with bearing complaints in which the propeller shaft has been replaced will be redebited.