AR54.61-D-5500-01A Remove/Install Speed Sensor on Transmission

AR54.61-D-5500-01A Remove/Install Speed Sensor On Transmission
- with TRANSMISSION 722.68
- with CODE (J19) Automatic 1 day/2 driver tachograph (EC)
- with TRANSMISSION 722.68
- with CODE (JD1) EU digital tachograph












1 Remove bolt (1) and detach speed sensor (B6 or B6/12) with attached lines and hook up one side.
For vehicles with code (J19) Tachograph 1 day / 2 driver automatic (EU)
or with code (JD1) EU digital tachograph
or with code (JD2) EU digital tachograph with rpm and additional recorder, the speed sensor (B6/12) is installed.
For vehicles without code (BB3) Electronic Stability Program, the speed sensor (B6) is installed.

Installation: Install new sealing ring.
Observe tightening torque for bolt (6).
For vehicles with code (J19) Tachograph 1 day / 2 driver automatic (EU)
or with code (JD1) EU digital tachograph
or with code (JD2) EU digital tachograph with rpm and additional recorder, replace the lead seal on the bolt (6).

2 Install in the reverse order.