Computer/Controls - Noises After Engine Is Switched Off
Noises during engine run-on / EGR valve cleaning functionTopic number LI14.20-N-048802
Version 1
Design group 14.20 Exhaust gas recirculation
Date 02-01-2010
Validity Model 906 with OM646 or OM642
Reason for change
Reason for block
Complaint:
Noises after engine is switched off.
Cause:
The noises during engine run-on are caused by the cleaning function of the EGR valve.
Remedy:
No remedy required because the cleaning function is the series production configuration. Sample noises which correspond to the series production configuration are attached.
Replacing the EGR valve may only be carried out if a corresponding fault code is entered in the engine control unit.