AH54.21-N-0001-03H Notes on Programming Control Units

AH54.21-N-0001-03H Notes On Programming Control Units



- with code ED5 Parameterizable special module (PSM),


- with code ED8 Preinstallation for parameterizable special module (PSM)

The parameterizable special module (PSM) control unit is delivered with a basic setting. Parameterization ex factory is not possible due to dependencies caused by the body.

The outlay for the final parameterization of the PSM control unit therefore does not belong to the package contents and must not be invoiced via the warranty channels.

Any costs arising shall be borne by the customer (body manufacturer). Parameter settings can be changed by any authorized MB workshop.

During the parameterization of new functions it is to be ensured that no dual assignment of a pin occurs.