GF54.50-D-2008H Mileage, Function

GF54.50-D-2008H Mileage, Function

- with CODE (CL4) Multifunction steering wheel with trip computer

Since start







Kilometers driven since the last start

The trip computer (RRE) allows the mileage covered to be displayed.
The display is active as from position 2 (circuit 15 ON) of the transmitter key when the TRIP menu item is called up.

After the "Trip computer" menu has been activated using the system selection button (S111s3) on the multifunction steering wheel (MFL), the driven travel distance "Since start" is shown on the multifunction display of the instrument cluster (A1) by pressing the scroll forward/ back button (S111s1) on the MFL.

4 wheel speed signals are evaluated for the travel distance. They are placed on the Controller Area Network bus class C (engine compartment) (CAN-C) by the ESP control unit (N30/4) and received by the instrument cluster.

If the display of travel time or travel distance exceeds the maximum display value, the travel time and travel distance is reset automatically. This preserves the relationship between travel time and mileage. The travel time and travel distance are reset when the travel time reaches 999 hours or the travel distance reaches 9999 km.

If the transmitter key is at position 0 (circuit 15C) or the transmitter key has been removed, all values in the short-distance memory are reset after 4 hours.