GF83.70-D-4204HF STH Radio Remote Control Transmitter, Component Description

GF83.70-D-4204HF STH Radio Remote Control Transmitter, Component Description
MODEL 906.111 /113 /131 /133 /135 /153 /155 /211 /213 /231 /233 /235 /253 /255 /611 /613 /631 /633 /635 /637 /653 /655 /657 /711 /713 /731 /733 /735
- with CODE (H12) Warm water auxiliary heater
- with CODE (HY1) Radio remote control for auxiliary heater

MODEL 906.611 /613 /631 /633 /635 /637 /653 /655 /657 /711 /713 /731 /733 /735
- with CODE (HZ5) 10kW warm water auxiliary heater with timer
- with CODE (HY1) Radio remote control for auxiliary heater







Shown up to 31.8.08
10 Radio remote control (RRC [FFB]) of stationary heater (STH)

Task
The STH is activated via the "On" button integrated in the STH RRC [FFB]. The STH is deactivated via the "Off" button integrated in the STH RRC [FFB]. The indicator lamp integrated in the STH RRC [FFB] indicates pressing of the buttons.







Body up to 31.8.08
10 Radio remote control (RRC [FFB]) of stationary heater (STH)
10a "Off" button
10e "On" button
10k Indicator lamp

An electronic analysis system, a transmitter and 3 batteries are also integrated in the STH RRC [FFB].

Function
The electronic analysis system integrated in the STH RRC [FFB] reads in the "On" button and the "Off" button and sends the relevant radio signals to the stationary heater radio signal receiver (A49/4) via the transmitter integrated in the STH RRC [FFB]. The indicator lamp is also actuated whenever the relevant button is pressed.

The voltage supply of the STH RRC [FFB] is provided via the 3 integrated batteries. In the event of low or defective batteries, the indicator lamp will no longer come on, the batteries must then be replaced.

In order to activate or deactivate STH heater operation via the STH RRC [FFB], the "Teach-in STH radio remote control" function must be used to teach it in.







Shown as of 1.9.08
11 Radio remote control (RRC [FFB]) of stationary heater (STH)

Task
The STH is activated when the light emitting diode (LED) on the STH RRC [FFB] flashes in red and the OK button is pressed. The STH is deactivated if the LED illuminates in green and the OK button is pressed. The LED illuminates in red during data transmission.







Body as of 1.9.08
11 Radio remote control (RRC [FFB]) of stationary heater (STH)
11a Activation button
11b OK button
11k LED

An electronic analysis system, a transmitter and 3 batteries are also integrated in the STH RRC [FFB].

Function
The electronic analysis system integrated in the STH RRC [FFB] reads in the activate button and the OK button and sends the relevant radio signals to the stationary heater radio signal receiver via the transmitter integrated in the STH RRC [FFB]. The LED is also actuated whenever the relevant button is pressed.

The voltage supply of the STH RRC [FFB] is provided via the 3 integrated batteries. In the event of depleted or defective batteries the LED will no longer come on, in which case the batteries must be replaced.

In order to activate or deactivate STH heater operation via the STH RRC [FFB], the "Teach-in STH radio remote control" function must be used to teach it in.