Procedures

AZ83.30-D-0001-15A Retrofit Climate Control Control And Operating Unit
- MODEL 906.### #N as of 315764, 906.### #S as of 105757, 906.### #A as of 961268







1 Mount interior compartment wiring harness with 12-pin connector (1) and wiring harness for new heater housing with 24-pin connector (2) onto climate control control and operating unit (3) and then lock in place.
2 Join interior compartment wiring harness and wiring harness for new heater housing to form a single harness.







3 Insert climate control control and operating unit (3) into installation opening and fasten into place with screws (4).