AH42.10-N-0002-01A Notes on Bleeding Brake System

AH42.10-N-0002-01A Notes on Bleeding Brake System

Model WD1, WD2, WD3, WD6, WD741, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7





When bleeding the brake system, observe the following notes:

1 Ensure that a filling height of 10 mm brake fluid is present in the reservoir.
2 If both brake circuits have been opened, first bleed the primary brake circuit, and then the secondary brake circuit (connected to the floating chamber).
3 When bleeding with the bleeder unit ensure that sufficient brake fluid is present in the bleeder unit, replenish if necessary.