AN82.61-D-7474-04A Retrofit Antenna For Global Positioning System (GPS)

AN82.61-D-7474-04A Retrofit Antenna For Global Positioning System (GPS)

DANGER: Risk of injury caused by scraping or cutting body parts on sharp vehicle parts.

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. AS00.00-Z-0017-01A
Deburr repair panels.







1 Unclip cover of speaker (2) in the middle of the instrument panel.
2 Route the antenna cable for the GPS antenna (1) starting from the bonding point of the GPS antenna (1), through the instrument panel (3) and inwards towards the COMAND operating, display and controller unit.
3 Clean and degrease the bonding point.
4 Remove protective foil from GPS antenna (1) and attach GPS antenna (1).
5 Connect the connector of the antenna cable for the GPS antenna (1) to the connector of the antenna adapter cable for the COMAND operating, display and controller unit.
6 Fix antenna cable for the GPS antenna (1) in place by appropriate means. Pay attention to routing which is without kinks and free from chafing in order to avoid the creation of noise and damage.
7 Clip on cover of speaker (2) in the middle of the instrument panel.