Service 2

Service 2

Interior - Required
- Reset service indicator in instrument cluster
- Check parking brake (function test only)

Interior - Recommended
Function test
- Horn, warning/indicator lamps, illumination and interior lighting
- Windshield wipers, windshield washer system, headlamp cleaning system
- Check seat belts and buckles for signs of external damage and proper function
- Check battery condition using "Midtronics MCR 717" Tester.
Attach Midtronics MCR717 Test Report print out here

Wheels, brakes - Required
- Check thickness of brake pads, front and rear brake pads
- Correct tire inflation pressure and record

Wheels, brakes - Recommended
- Remove and fit wheels
- Inspecting tires for damage and splits, measure tread depth, record in mm

Underside of vehicle - Required
- Leakage - Major components
Check for chafe markes, line routing, damaged components
In the event of leakage, determine cause and perform repair via separate work order
- Inspect condition of flexible discs
- Check front axle joints for play, check rubber boots
- Check rear axle joints for play, check rubber boots
- Inspect play of tie rod and drag link joints, inspect rubber boots

Vehicle Front/Rear - Recommended
- Check wiper blade condition
- Check and correct headlamp setting

Trunk - Required
- Correct inflation pressure in spare tire and enter in bar or psi

Engine Compartment - Required
- Leakage - Major components
Check for chafe markes, line routing, damaged components
In the event of leakage, determine cause and perform repair via separate work order
- Check catch, safety catch and hinges of engine hood for proper operation.
- Clean water drain in air/water duct
- Check condition of poly-V-belt
- Check the following fluid levels, correct if necessary
If there is a loss of fluid, determine cause and perform repair with separate work order
- Brake system
- Power steering
- Windshield washer system