Quarter Window Motor: Service and Repair

AR67.39-P-1050GH Remove/Install Electric Vent Window Motor
- with CODE (848) Electric pivoting side window







Removal, installation
1 Remove paneling at rear of roof frame
2 Disconnect connector from vent window motor (M21/8 or M21/9)
3 Remove screws (1) on vent window motor (M21/8 or M21/9)

CAUTION: Installation: Ensure that spacer sleeve and damper are correctly seated.

4 Remove cap (2) on guide (3)
5 Remove vent window motor (M21/8 or M21/9) on guide (3)
6 Install in opposite order
7 Check for proper function

NOTE: Switch on ignition, actuate vent window switch