Evaporator Temperature Sensor / Switch: Service and Repair

Remove And Install Evaporator Temperature Sensor






DANGER:
- Risk of explosion from welding or soldering work on closed air conditioning system. Risk of poisoning. Inhaling overheated refrigerant vapors may be toxic. Risk of injury, Contact with liquid refrigerant may result in injury to the skin and eyes.
- Do not carry out any welding work on the closed air conditioning system or in the surrounding area. No smoking or open flames. Wear eye protection and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged.

CAUTION: Protect air conditioning circuit and components from moisture when carrying out repair work.

1 Remove evaporator housing
2 Disassemble AC housing
3 Unclip evaporator temperature sensor (B10/6) from evaporator (1)
4 Install in the reverse order.