AR68.20-P-2310GI Remove/Install Gearshift Lever Cover

AR68.20-P-2310GI Remove/Install Gearshift Lever Cover
- Models 163.154/174 #A as of 289565
- Models 163.157/175 (all)





Remove/Install
1 Remove armrest lid (1)
2 Remove plastic screws (5)
3 Remove stowage box (2)

NOTE: Press the pin in the center of the rivet downwards for about 4 mm; then remove the rivet from above.

4 Remove selector lever paneling
- Long wedge: See Special Tools below.

5 Unscrew bolts (3)
6 Remove cover (4) from above

NOTE: Carefully prize open at front (arrows) and at the sides.

- Long wedge: See Special Tools below.

7 Detach connector from lower control panel control module

NOTE: 3 connector.

8 Install in the reverse order

Special Tools

Assembly Wedge P/N # 115 589 03 59 00: