AR68.20-P-2020GI Remove/Install Rear Center Console

AR68.20-P-2020GI Remove/Install Rear Center Console
- Models 163.154/174 #A as of 289565
- Models 163.157/175 (all)







Remove/Install
1 Remove armrest lid (1)
2 Remove stowage box in the center console

NOTE: Press the center pin approx. 4 mm downwards, then remove the rivet upwards

3 Remove screws (2) on the cup holder
4 Remove inner part of ashtray
5 Remove ashtray trim (3)

CAUTION: Risk of breaking the clips (4)

NOTE: Loosen clips (4) and pull back the lower edge of the cover and remove upwards

6 Remove screws (5)
7 Unclip rear center console (6) above (arrows)
- Long wedge: See Special Tools below.

8 Remove rear center console (6) from the center console
9 Disconnect plug from control module of rear control panel and ashtray

NOTE: Disconnect plug of the rear ashtray from ashtray housing

10 Install in the reverse order

Special Tools

Long Wedge P/N # 115 589 03 59 00: