Clutch Slave Cylinder: Service and Repair

CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION [C66M-R]

CAUTION:
- Do not allow clutch fluid get on a painted surface. Clutch fluid contains properties which can dissolve the paint. If clutch fluid gets on a painted surface, wash it off with water immediately and wipe the area off completely.

1. Remove the aerodynamic under cover No.2. Aerodynamic Under Cover No. 2 Removal/Installation

2. Disconnect the clutch pipe and hose No.2 from clutch release cylinder, and plug it to avoid clutch fluid leakage. Service and Repair

3. Remove the clutch release cylinder.






4. Install in the reverse order of removal.

5. Bleed the air from the clutch system. Service and Repair