Reduction Planetary Gear Disassembly

REDUCTION PLANETARY GEAR DISASSEMBLY

Structural View






Disassembly Procedure
1. Perform the following inspection:

CAUTION:
- If there is no malfunction based on the results of the inspection, it is not necessary to disassemble the reduction planetary gear.
- Visual inspection of parts (See VISUAL INSPECTION OF PARTS)
- Reduction planetary gear inspection (See REDUCTION PLANETARY GEAR INSPECTION)
- If there is a malfunction, disassemble the reduction planetary gear and replace the malfunctioning part with a new part.






2. Remove the snap ring.






3. Remove the reduction planetary carrier.
4. Clean the disassembled parts. (See AUTOMATIC TRANSAXLE CLEANING.)