Part 2

High Clutch Clearance Measurement/Adjustment ( Continued)

7. Select the appropriate snap ring from the following table:






Range = C + F
C : High clutch clearance
F : Thickness of removed snap ring

Note
Example
C : High clutch clearance is 1.550 mm {0.06102 in}
F : Thickness of removed snap ring is 1.615 mm {0.06358 in}
Range = 1.550 mm {0.06102 in} + 1.615 mm {0.06358 in} = 3.165 mm {0.1246 in}, the selected snap ring has a thickness of 1.8 mm {0.071 in}.











8. Assemble the selected snap ring.

CAUTION: After assembling the snap ring, verify that the snap ring is securely inserted into the bottom of the snap ring groove.

NOTE: Snap ring size: Outer diameter approx. 127.4 mm {5.016 in}












9. Install the SST.






10. Place a 98-196 N {10.0-19.9 kgf, 23.0-44.0 lbf} weight on the SST.

A : Weight (V-block)

CAUTION: To reduce error during the high clutch clearance measurement, place the weight near the center of the SST.

NOTE: Use a V-block as a weight.

11. Perform the high clutch clearance measurement from Step 7 (2). (See High Clutch Clearance Measurement.)