Standard Deployment Control System

DTC INSPECTION [STANDARD DEPLOYMENT CONTROL SYSTEM]

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Self Test".
2 Select "Modules".
3 Select "RCM".

- When using the PDS (Pocket PC)

1 Select "Module Tests".
2 Select "RCM".
3 Select "Self Test".

3. Verify the DTC according to the directions on the screen.

- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4. After completion of repairs, clear all DTCs stored in the SAS control module. Standard Deployment Control System