150000 MI or 240000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Multi-point inspection - Recommended
    Universal Joint, Drive/Propeller Shaft
      Inspect rear axle and U-joints; lubricate if equipped with grease fittings (AWD vehicles)
    Tie Rod End
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system strength and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Cabin Air Filter / Purifier
      (if equipped)
    Ball Joint
Replace
    Oil Filter, Engine
    Fluid - A/T
      Change automatic transmission fluid.
    Engine Oil
      Change engine oil and filter.
    Drive Belt
      Replace accessory drive belt(s) if not replaced within the last 100,000 miles (160,000 km).
    Coolant
      Change engine coolant.
    Air Filter Element
      Replace engine air filter.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.