Camshaft Position Sensor: Service and Repair

Camshaft Position (CMP) Sensor - 3.5L GTDI





NOTE: Lower radiator hose removed for clarity.











Removal and Installation

Both sensors

1. Remove the Air Cleaner (ACL) outlet pipe and the ACL.

RH sensor

2. Position the RH turbocharger intake tube aside.

LH sensor

3. Position the LH turbocharger intake tube aside.

Both sensors

4. Disconnect the Camshaft Position (CMP) sensor electrical connector.

5. Remove the bolt and the CMP sensor.
- To install, tighten to 10 Nm (89 lb-in).

6. NOTE: Lubricate the CMP sensor O-ring seal with clean engine oil.

To install, reverse the removal procedure.