Antenna, Radio: Description and Operation

ANTENNA

NOTE: The antenna and lead-in cables are not removable from the wiring harnesses. If either antenna cable needs to be replaced, cut the ends and leave the cable in the wiring harness. Route the new cable on top of the wiring harness and secure it with wire ties. Do not cut into the wiring harness to remove the existing antenna cable.

The antenna lead-in cable is connected to the audio unit and has an in-line connector (located at the right end of the instrument panel below the glove compartment) to the antenna cable. The antenna cable runs along the passenger side rocker panel within the body main wiring harness, and runs up the passenger side C-pillar to the antenna module.

The antenna system consists of the following components:
- Antenna cable
- Antenna lead-in cable
- Antenna module