Crankshaft, Engine

Crankshaft
Main bearing Journal diameter 67.483-67.503 mm (2.6568-2.6576 inch)
Main bearing journal diameter: maximum between cross sections out-of-round 0.0075 mm (0.0003 inch)
Main bearing Journal diameter: maximum (straightness) 0.004 mm (0.0002 inch)
Runout: FIM of center journals when located on front and rear 0.05 mm (0.0019 inch)(3 journal places)
Crankshaft journal to main bearing clearance 0.048-0.024 mm (0.001891-0.0009 inch)
Connecting rod journal diameter 53.003-52.983 mm (2.0867-2.0859 inch)
Connecting rod journal diameter: maximum between cross sections out-of-round 0.0075 mm (0.0003 inch)
Connecting rod journal diameter: maximum taper 0.004 mm (0.0002 inch)
Crankshaft end play 0.075-0.377 mm (0.003-0.0148 inch)
Crankshaft main bearing bolts Refer to the Procedure Assembly