Transmission Speed Sensor: Service and Repair

Turbine Shaft Speed (TSS) Sensor and Output Shaft Speed (OSS) Sensor

Removal





1. If necessary, remove the Turbine Shaft Sensor (TSS).
1 Remove the bolt.
2 Remove the Turbine Shaft Sensor (TSS).





2. Position the Heated Oxygen Sensor (H02S) connector out of the way.





3. If necessary, remove the Output Shaft Speed (OSS) sensor.
1 Remove the bolt.
2 Remove the Output Shaft Speed (OSS) sensor.

Installation





1. If removed, install the Output Shaft Speed (OSS) sensor.
1 Lubricate the O-ring and install the OSS sensor.
2 Install the bolt.





2. Position the Heated Oxygen Sensor (H02S) connector back in place.





3. If removed, install the Turbine Shaft Sensor (TSS).
1 Lubricate the O-ring and install the Turbine Shaft Sensor (TSS).
2 Install the bolt.