Removal

AXLE: STEERING KNUCKLE (for 2WD): REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL

2. DISCONNECT SPEED SENSOR CONNECTOR LH Removal

3. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH Removal

4. REMOVE FRONT DISC Removal

5. REMOVE FRONT DISC BRAKE DUST COVER LH Removal

6. DISCONNECT TIE ROD ASSEMBLY LH Removal

7. DISCONNECT FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH Removal

8. DISCONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH Removal

9. REMOVE FRONT STABILIZER LINK ASSEMBLY LH Removal

10. DISCONNECT FRONT SHOCK ABSORBER ASSEMBLY LH Removal

11. DISCONNECT FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH Removal

12. REMOVE STEERING KNUCKLE SUB-ASSEMBLY LH Removal

13. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH Removal