Removal

GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE MAP LIGHT ASSEMBLY Removal

4. REMOVE GARAGE DOOR OPENER TRANSMITTER





(a) Disconnect the connector.

(b) Remove the 2 screws and garage door opener transmitter.