Installation

WIPER AND WASHER: WIPER SWITCH: INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Attach the claw and install the wiper switch.





(b) Connect the 2 connectors.

2. INSTALL STEERING COLUMN COVER

(a) w/ Driver Monitor Camera:

(1) Connect the connector.

(b) Attach the 4 clips to install the steering column cover upper onto the instrument panel cluster finish panel.





(c) Attach the claw to install the upper steering column cover.

(d) Attach the 2 claws to install the lower steering column cover.

NOTICE:
Do not damage the tilt and telescopic switch.

(e) Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.