On-Vehicle Inspection

INTERIOR: REAR SUNSHADE ASSEMBLY: ON-VEHICLE INSPECTION

1. CHECK REAR SUNSHADE ASSEMBLY

(a) With the shift lever on P, the engine switch on (IG), and the rear sunshade fully lowered, check that pressing the integration control and panel assembly's rear sunshade switch fully raises the rear sunshade.

(b) With the shift lever on P, the engine switch on (IG), and the rear sunshade fully raised, check that pressing the integration control and panel assembly's rear sunshade switch fully lowers the rear sunshade.

(c) With the shift lever on P, the engine switch on (IG), and the rear sunshade fully lowered, check that pressing the curtain switch assembly's rear sunshade switch fully raises the rear sunshade.

(d) With the shift lever on P, the engine switch on (IG), and the rear sunshade fully raised, check that pressing the curtain switch assembly's rear sunshade switch fully lowers the rear sunshade.

(e) With the shift lever on P, the engine switch on (IG), and the rear sunshade fully raised, check that moving the shift lever to R fully raises the rear sunshade.

(f) When the engine switch is turned off while the rear sunshade is rising or lowering, check that the operation continues until the rear sunshade has fully risen or fully lowered, respectively.

(g) For 60 seconds after the engine switch is turned from on (IG) to OFF, check that pressing the integration control and panel assembly's rear sunshade switch fully lowers or raises the rear sunshade. Also, after 60 seconds have passed, check that operation of the rear sunshade is not possible.