Installation

AA80F AUTOMATIC TRANSMISSION: FLOOR SHIFT ASSEMBLY: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY





(a) Install the floor shift with the 4 bolts.

Torque : 8.3 Nm (85 kgf-cm, 74 in-lbf)

(b) Attach the 6 wire harness clamps to the floor shift.

(c) Connect the 2 connectors.

2. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY





(a) Temporarily connect the shifting rod to the connecting rod swivel with the nut.

HINT
The nut is tightened to a torque specification during the shift lever position adjustment procedure.

3. INSTALL NO. 1 CONSOLE BOX DUCT

(a) Install the duct with the 2 screws.

4. INSTALL CONSOLE BOX ASSEMBLY

(a) Install the console box Installation.

5. ADJUST SHIFT LEVER POSITION

(a) Adjust the shift lever position AA80F Automatic Transmission.

6. INSTALL FRONT FLOOR NO. 1 HEAT INSULATOR Installation

7. INSTALL FRONT EXHAUST PIPE ASSEMBLY

(a) Install the front exhaust pipe Installation.

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSTALL COWL TOP VENTILATOR LOUVER Installation

10. INSPECT SHIFT LEVER POSITION

(a) Inspect the shift lever position AA80F Automatic Transmission.