Removal

AA80E AUTOMATIC TRANSMISSION: FLOOR SHIFT ASSEMBLY: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE CONSOLE BOX ASSEMBLY

(a) Remove the console box Removal.

4. REMOVE NO. 1 CONSOLE BOX DUCT

(a) Remove the 2 screws and pull out the duct.

5. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY





(a) Move the shift lever to the N position.

(b) Remove the nut and disconnect the shifting rod from the connecting rod swivel.

6. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY





(a) Disconnect the 2 connectors.

(b) Disconnect the 5 wire harness clamps from the floor shift.

(c) Remove the 4 bolts and floor shift.