Front Shock Absorber

SUSPENSION: FRONT SHOCK ABSORBER: DISPOSAL

1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH (for 2WD)

(a) Fully extend the front shock absorber rod.





(b) Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

CAUTION:
Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.

NOTICE:
The gas is colorless, odorless and nonpoisonous.

2. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH (for AWD)

(a) Fully extend the front shock absorber rod.





(b) Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

CAUTION:
Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.

NOTICE:
The gas is colorless, odorless and nonpoisonous.