Removal

AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SWITCH AND VOLUME CASE Removal

4. REMOVE NO. 2 STEERING WHEEL COVER LOWER Removal

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING PAD SWITCH ASSEMBLY





(a) Disconnect the connector.

(b) Remove the 4 screws and steering pad switch.