Installation

SEAT BELT: SHOULDER BELT ANCHORAGE SWITCH: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL HEIGHT ADJUSTABLE ANCHOR SWITCH





(a) Attach the 2 claws to install the switch.

2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Reassembly

3. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Reassembly

4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Reassembly

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation