Installation

SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for Power Seat): INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL REAR SEAT INNER BELT ASSEMBLY CENTER





(a) Install the belt with the bolt.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

2. INSTALL REAR SEAT INNER BELT ASSEMBLY LH





(a) Install the belt with the bolt.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

3. INSTALL REAR SEAT INNER BELT ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

4. INSTALL REAR SEAT ASSEMBLY

(a) Install the rear seat Installation.