Installation

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION

1. INSTALL NO. 2 TELEPHONE BRACKET

(a) Set the aligning protrusions of the bracket, labeled A, into the holes of the DCM (telematics transceiver).





(b) Install the No. 2 telephone bracket with the screw labeled B.

2. INSTALL NO. 1 TELEPHONE BRACKET

(a) Set the aligning protrusions of the bracket, labeled A, into the holes of the DCM (telematics transceiver).





(b) Install the No. 1 telephone bracket with the 2 screws labeled B.

3. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

(a) Connect the connector.





(b) Install the DCM (telematics transceiver) with the 3 bolts.

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

5. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

6. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

7. INSTALL INSTRUMENT PANEL LOWER Installation

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT SIDE PANEL RH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

11. INSTALL NO. 3 BOX PANEL Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. PRECAUTION FOR DCM (TELEMATICS TRANSCEIVER)

(a) When replacing the DCM (telematics transceiver), perform the vehicle contract setting DCM Activation.