Installation

1UR-FSE FUEL: FUEL PUMP RESISTOR: INSTALLATION

1. INSTALL FUEL PUMP RESISTOR

(a) Install the resistor with the bolt.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(b) Connect the resistor connector.

2. INSTALL ENGINE ROOM SIDE COVER LH Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

5. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.