Installation

1UR-FSE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION

1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Installation

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

4. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

5. INSPECT FOR FUEL LEAK Fuel System

6. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER

(a) Install the service hole cover with new butyl tape.

7. INSTALL REAR SEAT ASSEMBLY LH (for Power Seat)

(a) Install the rear seat assembly LH Installation.

8. INSTALL REAR SEAT ASSEMBLY LH (for Ottoman)

(a) Install the rear seat assembly LH Installation.

9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

(a) Install the rear seat cushion assembly Installation.