Reading and Clearing Diagnostic Trouble Codes

POWER SOURCE / WIRING: ELECTRIC POWER CONTROL SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Electric Power Control / Trouble Codes.

(e) Read the DTCs.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the tester on.

(d) Enter the following menus: Body Electrical / Electric Power Control / Trouble Codes.

(e) Erase the DTCs.