Installation

LIGHTING: HAZARD WARNING SWITCH: INSTALLATION

1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

(a) Attach the 2 claws and install the hazard warning signal switch.





(b) Connect the connector.

2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Multi-display) Installation

3. INSTALL MULTI-MEDIA MODULE DISPLAY ASSEMBLY (w/ Multi-display) Installation

4. INSTALL RADIO RECEIVER ASSEMBLY Installation

5. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER Installation

6. INSTALL REAR CONSOLE PANEL UPPER Installation

7. INSTALL NO. 3 BOX PANEL Installation

8. INSTALL SHIFT LEVER KNOB Installation

9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

CAUTION:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL COWL TOP VENTILATOR LOUVER RH Installation