Installation

LIGHTING: HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY





(a) Install the rear height control sensor with the 3 nuts.

Rear suspension member side - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

Lower arm side - Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the connector.

2. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY





(a) Install the front height control sensor with the 3 nuts.

Rear suspension member side - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

Lower arm side - Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the connector.

3. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT

4. PREPARATION FOR HEADLIGHT AIMING (Using a screen)

5. HEADLIGHT AIMING INSPECTION

6. HEADLIGHT AIMING ADJUSTMENT