Initial Inspection and Diagnostic Overview

OTHER SYSTEM: CLOCK SYSTEM (w/ Multi-display): HOW TO PROCEED WITH TROUBLESHOOTING

HINT
Use these procedures to troubleshoot the clock system.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

NEXT -- Continue to next step.

3. CHECK FOR DTC

(a) w/ Navigation System (for DVD)

Refer to DTC Check/Clear procedures of the navigation system Navigation System (for DVD).

w/ Navigation System (for HDD)

Refer to DTC Check/Clear procedures of the navigation system Navigation System (for HDD).

w/o Navigation System

Refer to DTC Check/Clear procedures of the audio and visual system (w/ Multi-display) Audio and Visual System (w/ Multi-Display).

Result





B -- GO TO NAVIGATION SYSTEM (for DVD) Navigation System (for DVD)

C -- GO TO NAVIGATION SYSTEM (for HDD) Navigation System (for HDD)

D -- GO TO AUDIO AND VISUAL SYSTEM (w/ Multi-display) Audio and Visual System (w/ Multi-Display)
A -- Continue to next step.

4. PROBLEM SYMPTOM CONFIRMATION

(a) Problem symptom confirmation.

Result





B -- Go to step 6
A -- Continue to next step.

5. SYMPTOM SIMULATION

NEXT -- Continue to next step.

6. PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table Symptom Related Diagnostic Procedures.

Result





B -- Go to step 8
A -- Continue to next step.

7. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW

(a) Terminals of ECU Pinout Values and Diagnostic Parameters.

NEXT -- Continue to next step.

8. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

9. CONFIRMATION TEST

NEXT -- END