Removal

1UR-FSE LUBRICATION: OIL LEVEL SENSOR (for AWD): REMOVAL

1. REMOVE FRONT CENTER FLOOR COVER Removal

2. REMOVE NO. 2 ENGINE UNDER COVER Removal

3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH Removal

4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH Removal

5. REMOVE NO. 1 ENGINE UNDER COVER Service and Repair

6. REMOVE FRONT SUSPENSION MEMBER PROTECTOR LOWER Removal

7. DRAIN ENGINE OIL Replacement

8. REMOVE ENGINE OIL LEVEL SENSOR

(a) Disconnect the engine oil level sensor connector.





(b) Remove the 4 bolts.

(c) Rotate the engine oil level sensor 180° and remove it.





(d) Cut off the gasket as shown in the illustration.





(e) Remove the gasket from the oil level sensor.

HINT
After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.