Air Bag(s) Arming and Disarming: Service and Repair
Air Bag(s) Arming and Disarming
After work on the SRS is completed, perform the SRS warning light check Diagnosis System.
* When the cable is disconnected from the negative (-) battery terminal, the memory settings of each system will be cleared. Because of this, be sure to write down the settings of each system before starting work. When work is finished, reset the settings of each system as before. Never use a backup power supply from outside the vehicle to avoid erasing the memory in a system.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
