CD Cannot be Inserted or is Ejected Right After Insertion

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM (w/o Multi-display): CD cannot be Inserted or is Ejected Right After Insertion
- CD cannot be Inserted or is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF PROPER CD IS INSERTED

(a) Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.

OK:

Normal audio CD.

HINT
Translucent or uniquely-shaped CDs cannot be played.

NG -- CD IS FAULTY
OK -- Continue to next step.

2. CHECK THAT CD IS INSERTED PROPERLY

(a) Check whether or not the CD is inserted upside down.

OK:

CD is properly inserted.

NG -- INSERT CD PROPERLY
OK -- Continue to next step.

3. CLEAN CD

(a) Clean the disc by wiping the CD's underside radially with a soft cloth.





OK:

Malfunction disappears.

NOTICE:
Do not use a conventional record cleaner or anti-static preservative.

NG -- REPLACE CD WITH ANOTHER AND RECHECK

OK -- CD WAS DIRTY

4. REPLACE CD WITH ANOTHER AND RECHECK

(a) Replace the CD with a normal one and check if the same problem occurs again.

OK:

Malfunction disappears.

NG -- PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

OK -- CD IS FAULTY