Reading and Clearing Diagnostic Trouble Codes

CRUISE CONTROL: LANE-KEEPING ASSIST SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Tune the Techstream on.

(d) Enter the following menus: All ECUs / Lane Keep Assist / Trouble Codes.

(e) Read the DTCs.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: All ECUs / Lane Keep Assist / Trouble Codes.

(e) Clear the DTCs.