C1698

PARK ASSIST / MONITORING: ADVANCED PARKING GUIDANCE SYSTEM: C1698: Wheel Base Information Discrepancy
C1698 - Wheel Base Information Discrepancy

DESCRIPTION

When the wheelbase information in the EEPROM of the parking assist ECU and the wheelbase information received from the AFS ECU via CAN communication do not match, this DTC is output.

If a parking assist ECU or AFS ECU is installed into a vehicle with a different wheelbase, this DTC is output and "System Initializing" is displayed.





INSPECTION PROCEDURE

PROCEDURE

1. CHECK WHEEL BASE INFORMATION

(a) Write the AFS ECU's wheelbase information (CAN information) to the EEPROM of the park assist ECU.

(1) Enter the SIGNAL CHECK screen on the Diagnosis Menu Diagnosis System.

(2) Select the "NEXT" or "OK" button until "STEERING ANGLE SETTING" screen appears.

(3) Select the "OK" button on the "STEERING ANGLE SETTING" screen.

(b) On the "SIGNAL CHECK" screen, check if the body type is properly displayed Diagnosis System.

(c) Select the "NEXT" button on the "VERIFY MODE" screen to update the information to the ECU Calibration.

NEXT -- END