Installation

AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: AIR COOLED OIL COOLER: INSTALLATION

1. INSTALL OIL COOLER ASSEMBLY

(a) Install the oil cooler assembly to the oil cooler bracket with the 3 bolts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the 2 oil cooler hoses to the oil cooler assembly.

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL RADIATOR GRILLE PROTECTOR Installation

4. INSTALL HIGH PITCHED HORN Installation

5. INSTALL COOL AIR INTAKE DUCT SEAL Installation

6. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

7. VEHICLE PREPARATION FOR FOG LIGHT AIMING Adjustments

8. PREPARATION FOR FOG LIGHT AIMING Adjustments

9. INSPECT FOG LIGHT AIMING Adjustments

10. ADJUST FOG LIGHT AIMING Adjustments

11. ADD AUTOMATIC TRANSMISSION FLUID

(a) Add automatic transmission fluid Procedures.

12. INSTALL NO. 2 ENGINE UNDER COVER