Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

5. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

6. REMOVE STEERING PAD Removal

7. REMOVE STEERING WHEEL ASSEMBLY Removal

8. REMOVE STEERING COLUMN COVER Removal

9. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR

(a) Disconnect the connectors from the spiral cable with steering angle sensor.





NOTICE:
When disconnecting the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable with steering angle sensor.

10. REMOVE SPIRAL CABLE

(a) Disengage the 6 claws and 2 pins, and remove the spiral cable from the steering angle sensor.