Removal

2UR-GSE EMISSION CONTROL: PURGE VALVE: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

HINT
The No. 1 vacuum switching valve assembly is the purge valve.

(a) Disconnect the No. 1 vacuum switching valve assembly connector.





(b) Disconnect the fuel vapor feed hose and No. 2 fuel vapor feed hose from the No. 1 vacuum switching valve assembly.

(c) Remove the bolt and No. 1 vacuum switching valve assembly.